YT-0003S charger is special design for lithium polymer, lithium-ion battery 2 and 3cells by YUNTONG.
•Can charge 2 or 3 cell Li-polymer or Li-ion battery (not both at the same time).
•With professional charge IC control, high charge efficiency and precision.
•Input volage: 10 to 18V DC, recommended : 12Vdc (Center positive) regulated.
•Charge current: 1.1A
•Balance performance
•Balancing precision: 30mV
•Output reverse polarity protection
•Short circuit protection
•Green and red two color LED, red for power, green for charging
•Size: 23.5 x 53 x 81.5mm
•Weight: 53g
Output Voltage :
1. 2S Cell : 8.4V
2. 3S Cell : 12.6V
– Output Current : 1.1A
– STATUS :
1. RED LED ON : Charging
2. GREEN LED ON : Charge Complete
3. RED LED Blinking : Bad Battery Connection
WARNING
– Do not apply heat, water or any other liquid on the battery.
– Do not take the battery apart.
– Do not use damaged batteries. (inflated, deformed, damaged, etc)
– Do not charge 2S and 3S Cell together at once.
– When charging, make sure the battery is connected into the correct polarity.
– Do not charge when the battery is hot. Please charge after it has cooled off.
– When the battery is not being used, please take apart.
– Do not charge the battery when it is being used by the controller.
IMPORTANTE: Requiere un eliminador de baterías regulado de 12Vdc de al menos 1.2A (NO incluido)..
Related products
Cargadores